Adjustable Chain Sling
- Grade 80 Alloy Chain
- Alloy Steel Master Control Link
- Each assembly serialized for traceability
- Complies with OSHA - proof tested and certified
- Ideal for machine shop requirements
WARNING
- Failure to follow the care, use and inspection instructions could result in severe personal injury.
Do not exceed rated capacities.
- Sling capacity rating decreases as the angle from horizontal decreases.
We do not recommend using at angles of less than 45°.
- Loads must always be securely attached and balanced. You must never substitute another chain or exceed the load limit.
- The load bearing chain must be seated at the base of adjusting slot of the Master Control Link.
- The Alloy Chain and Master Control Link shall not be used separately for general purpose lifting.
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.

CAD Download Link
|
| 7/32 | 2700 | 4700 | 2 3/16 | 2 11/16 | 15/16 | 6 | 4.2 |
| 7/32 | 2100 | 4700 | 2 3/16 | 2 11/16 | 15/16 | 10 | 6.2 |
| 9/32 | 4300 | 7400 | 2 7/8 | 3 3/16 | 1 1/16 | 6 | 7.5 |
| 9/32 | 4300 | 7400 | 2 7/8 | 3 3/16 | 1 1/16 | 10 | 10.5 |
| 3/8 | 8800 | 15200 | 3 3/4 | 4 1/8 | 1 9/16 | 10 | 18.5 |
| 3/8 | 8800 | 15200 | 3 3/4 | 4 1/8 | 1 9/16 | 14 | 24.5 |
| 1/2 | 12000 | 20800 | 4 3/8 | 4 3/8 | 2 | 10 | 42.0 |
| 1/2 | 12000 | 20800 | 4 3/8 | 4 3/8 | 2 | 14 | 52.0 |
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).